Minolta CF2002, CF3102 Adjusting the Options, Checking the Paper Reference Position for PF-118

Printer Panel 1

10. Adjusting the Options

NOTE

•With the printer, the adjustments of each option are performed with the servicing equipment. Therefore, start up the External Panel Controller, and make the adjust- ments with the appropriate setting.

•After adjusting the options, restart the printer.

10.1Checking the Paper Reference Position for PF-118

NOTE

•For details on the installing PF-118, refer to its Setup Instructions.

•To adjust PF-118, follow the instructions below.

1.Load Letter-size (or A4-size) paper into the paper drawer of the optional paper feed unit.

2.Check that the External Panel Controller appears in the computer screen, and then display the Tech. Rep. Mode screen. (For details about displaying the Tech. Rep. Mode screen, refer to the Service Manual.)

C4581P003CA

3. Click “Machine Adjust”.

C4581P004CA

4. Click “PRT Area”.

C4581P014CA

5. Click “Left Margin”.

C4581P015CA

6.Select the key for the paper drawer that is to be adjusted, and then click the Start key in the External Panel Controller.

A test page is printed.

*If two optional paper feed units are installed, perform the same check and adjustment procedures in steps 7 and onward also for the fourth drawer.

4581-7777-01 – 27 –