Minolta CF2002 Setting the User Environment Administrator Opera- tions volume, Printer Panel

Printer Panel 1

19. Setting the User Environment (Administrator Opera- tions volume)

The following procedures are basically for administrators. Refer to the following only if a request for setup is received from the user.

NOTE

The network and computer environment for the user is usually controlled by a special- ized administrator. Before performing the setup procedure described below, first obtain approval from the administrator, and then perform the operations under the administra- tors supervision.

19.1Specifying User’s Choice Settings

Set up the printer controller according to the procedures shown below.

Specify the print settings.
Local→Specify the settings necessary for a local		p. 45
connection.
Network→Specify the settings necessary for a
network connection.
	↓
	Check the operation.	p. 50
	↓
	Finish
	Troubleshooting	p. 50

19.2Entering Setup Mode on the Controller

In order to select functions, the “Functions” menu must be selected.

1. Check that “Info xxxx” appears in the display, and then press the [Menu] key in the printer panel.

NOTE

“xxxx” indicates the “Server Name”.

C4004O583CA

2. Press ▲ or ▼ until “Run Setup” appears, and then press the [Set] key.

C4581U030AA

4581-7777-01 – 45 –