Minolta CF3102 manual Preparing for Installation of the Controller, Printer Panel, Default setting

Printer Panel 1

11. Preparing for Installation of the Controller

Before installing the controller, make the following settings.

■Selecting the “Printer” Setting

Use the External Panel Controller to change the “Priority Device” setting to “Printer”. [Default setting: Copier]

1.Press the [Utility] key on the External Panel Controller.

2.Click [1/2] on the User’ Choice: 2 screen.

3.Click [Printer] for the “Priority Device” setting.

■Specifying the Administrator Access Code

Use the “Tech. Rep. Mode” of the External Panel Controller to specify the administrator access code, and then inform the customer of the specified access code.

NOTE

The access code is required in order to log into the Administrator mode of PageScope Light.

[Default setting: 0000]

■Specifying the Peripheral Setting

Change the Peripheral setting for the External Panel Controller to “Controller 2”.

[Default setting: Without Controller]

1.Enter the Tech. Rep. Mode of the External Panel Controller.

2.Click [Peripheral Setting] of the System Input.

3.Click [Controller 2].

C4581P017CA

4.Set the power switch of the printer to “O”.

5.Remove the servicing equipment.

4581-7777-01 – 32 –