Minolta CF2002, CF3102 Setting Up the Selector, Connecting the Equipment Cables, Printer Panel

Printer Panel 1

7.3Setting Up the Selector

NOTE

Prepare aluminum tape before beginning the setup.

1. Remove the selector from its box.

C4004U601AA

7.4Connecting the Equipment Cables

1. Using a DTP32 cross-cable, connect the I/O port of the X-Rite to port B of the selector.

C4004U559AA

2.Remove the two screws from the selector, and then remove the upper cover.

C4004U602AA

3.Affix aluminum tape to the converter as shown in the illustration.

Aluminum tape

C4004U603AA

2.Using the RS232 straight cable (2), connect the COM 1 port of the computer to port C on the selector.

NOTE

When connecting to the COM2 port, set the

External Panel Controller port setting to

COM2.

C4581U022AA

3.Selector and printer connection:

Using a cross-cable, connect port A of the selector to the printer.

C4581U027AA

4581-7777-01 – 11 –