Troubleshooting
The projector does not turn on.
| Cause | Remedy |
|
|
|
|
| Plug the power cord into the AC inlet on the |
| There is no power from the power | projector, and plug the power cord into the |
| cord. | power outlet. If the power outlet has a switch, |
|
| make sure that it is switched on. |
|
|
|
| Attempting to turn the projector on | Wait until the cooling down process has |
| again during the cooling process. | completed. |
|
|
|
No picture |
| |
|
|
|
| Cause | Remedy |
|
|
|
| The video source is not turned on or | Turn the video source on and check that the |
| connected correctly. | signal cable is connected correctly. |
|
|
|
| The projector is not correctly | Check the connection. |
| connected to the input signal device. | |
|
| |
|
|
|
| The input signal has not been | Select the correct input signal with the |
| SOURCE key on the projector or remote | |
| correctly selected. | |
| control. | |
|
| |
|
|
|
| The lens cover is still closed. | Open the lens cover. |
|
|
|
Blurred image |
| |
|
|
|
| Cause | Remedy |
|
|
|
| The projection lens is not correctly | Adjust the focus of the lens using the focus |
| focused. | ring. |
|
|
|
| The projector and the screen are not | Adjust the projection angle and direction as |
| aligned properly. | well as the height of the projector if necessary. |
|
|
|
| The lens cover is still closed. | Open the lens cover. |
|
|
|
Remote control does not work |
| |
|
|
|
| Cause | Remedy |
|
|
|
| The battery is out of power. | Replace the battery with a new one. |
|
|
|
| There is an obstacle between the | Remove the obstacle. |
| remote control and the projector. | |
|
| |
|
|
|
| You are too far away from the | Stand within 8 meters (26 feet) of the |
| projector. | projector. |
|
|
|
60