ensure a quality use of the wireless microphone, it is recommended that your microphone conforms to the specifications listed in the table below.
Signal | Parameter | Min | Type | Max |
|
|
|
|
|
|
|
| Transducer Principle |
|
|
| Dynamic |
Microphone |
|
|
|
|
|
Impedance | 300 |
| 1K | ohm | |
|
|
|
|
|
|
| Frequency response | 600 |
| 16k | Hz |
|
|
|
|
|
|
•There are two ways to adjust microphone volumes.
•Directly set microphone volume levels in the SYSTEM SETUP: Advanced > Audio Settings > Microphone Volume menu.
•Set projector volume levels in the SYSTEM SETUP: Advanced > Audio Settings > Volume menu, or press Volume keys (+,
•To make the microphone input available when the projector is in standby mode, turn on the SYSTEM SETUP: Basic > Standby Settings > Microphone menu.
•If the microphone is not working, check the volume setting and cable connection.
•You might get feedback noise from the microphone when you are too close to the speaker of the projector. Move the microphone away from the speaker of the projector. The greater volume you require, the greater distance you need to be away from the speaker to prevent the noise.
20