ViewSonic PJD7400W, PJD7382 Using Screen Color, Fine-tuning the image quality in user modes

Setting the User 1/User 2 mode

There are two user-definable modes if the current available picture modes are not suitable for your need. You can use one of the picture modes (except the User 1/User 2) as a starting point and customize the settings.

1.Press MENU/EXIT on the projector or Menu on the remote control to open the On- Screen Display (OSD) menu.

2.Go to the PICTURE > Color Mode menu.

3.Press / to select User 1 or User 2.

4.Press to highlight Reference Mode.

This function is only available when User 1 or User 2 mode is selected up in the Color Mode sub-menu item.

5.Press / to select a picture mode that is closest to your need.

6.Press to select a sub-menu item to be changed and adjust the value with / . See Fine-tuning the image quality in user modes below for details.

7.When all settings have been done, highlight Save Settings and press MODE/ENTER on the projector or ENTER on the remote control to store the settings.

8.The confirmation message 'Setting Saved' is displayed.

Using Screen Color

In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Screen Color feature can help correct the projected picture’s colors to prevent possible color difference between the source and projected pictures.

To use this function, go to the DISPLAY > Screen Color menu and press / to select a color which is closest to the color of the projection surface. There are several precalibrated colors to choose from: Whiteboard, Greenboard, and Blackboard.

This function is only available when a PC type input signal is selected.

Fine-tuning the image quality in user modes

According to the detected signal type, there are some user-definable functions available when User 1 or User 2 mode is selected. You can make adjustments to these functions based on your needs.

Adjusting Brightness

Highlight the PICTURE > Brightness menu and press	/ .
The higher the value, the brighter the image. And the
lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as
black and that detail in the dark areas is visible.
		+30

Adjusting Contrast

Highlight the PICTURE > Contrast menu and press / .

The higher the value, the greater the contrast. Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected

input and viewing environment. -30

+50

0

+70

+30

32