4. SYSTEM SETUP: Basic menu
5. SYSTEM
Function | Description | |
Language | Sets the language for the | |
"Using the menus" on page 24 for details. | ||
| ||
|
| |
Projector | The projector can be installed on a ceiling or behind a screen, or | |
Position | with one or more mirrors. See "Choosing a location" on page 12 | |
for details. | ||
|
| |
Auto Power | Allows the projector to turn off automatically if no input signal | |
Off | is detected after a set period of time. See "Setting Auto Power | |
Off" on page 55 for details. | ||
|
| |
Blank Timer | Sets the image blank time when the Blank feature is activated, | |
once elapsed the image will return to the screen. See "Hiding the | ||
| image" on page 37 for details. | |
|
| |
Panel Key | I | |
Disables or enables all panel key functions except I POWER | ||
Lock | on the projector and keys on the remote control. See "Locking | |
| control keys" on page 37 for details. | |
Splash | Allows you to select which logo screen will be displayed during | |
Screen | projector | |
|
| |
Screen | Captures and stores the projected picture as Screen Capture. | |
Capture | See "Creating your own startup screen" on page 39 for details. | |
|
| |
Message | Selecting On displays the current information on the screen | |
when the projector is detecting or searching for a signal. | ||
| ||
|
| |
LAN Control | See "Controlling the projector through a LAN environment" on | |
Settings | page 40 for details. | |
|
| |
Standby | See "Using the projector in standby mode" on page 44 for | |
Settings | details. | |
High Altitude | A mode for operation in high altitude areas. See "Operating in a | |
Mode | high altitude environment" on page 38 for details. |
SETUP: Advanced menu
DCR
Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to the input image detected.
This function is only available when a PC source is in use.
After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation.
50