Fine-tuning the image clarity
1. | Adjust the projected image to the size | 2. | If necessary, Sharpen the image by | ||||||||
| that you need using the zoom ring. |
| rotating the focus ring. | ||||||||
| (PJD7400/PJD7400w only) |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PJD7382
PJD7400/PJD7400w
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps.
•Using the remote control
Press / on the projector or remote control to display the Keystone correction page. Press to correct keystoning at the top of the image. Press to correct keystoning at the bottom of the image.
•Using the OSD menu
1.Press MENU/EXIT on the projector or Menu on the remote control and then press
/ until the DISPLAY menu is highlighted.
2.Press to highlight Keystone and press MODE/ENTER on the projector or ENTER on the remote control. The Keystone correction page is displayed.
3.Press to correct keystoning at the top of the image or press to correct keystoning at the bottom of the image.
PJD7382
PJD7400/PJD7400w
Press |
|
| Press / . |
/ . |
|
28