ViewSonic PJD7400, PJD7382 Projector exterior view, Front/upper side, See Projector on page 8 for

Projector exterior view

Front/upper side

1.	External control panel
	(See "Projector" on page 8 for
	details.)

1

2

PJD7382

2.	Lamp cover
3.	Vent (heated air exhaust)
4.	Quick-release button
5.	Lens cover
6.	Front IR remote sensor

3							6
4
5		7
						8
	PJD7400/
1	PJD7400w
2					7
3
				6
4
5			8

Rear/lower side

9 10 11 12 13 14 15 16 17 18 19 20 21

DC 12V OUT 22

23

24

7.	Focus ring (PJD7382)/Focus and
	Zoom ring (PJD7400/PJD7400w)
8.	Projection lens
9.	Kensington anti-theft lock slot
10.	AC power cord inlet
11.	Rear IR remote sensor
12.	RJ45 LAN input port
13.	Type B USB port
14.	RS-232 control port
15.	RGB signal output socket
16.	RGB (PC)/Component video
	(YPbPr/YCbCr) signal input
	socket-1/2
17.	Video input socket/
	S-Video input socket
18.	Audio signal input socket (L/R)
19.	Audio signal input socket
	Audio signal output socket
20.	Microphone input socket
	Connects a microphone with a 3.5
	mm mini jack cable or wireless
	module.
21.	Security bar
	Connects a commercially available
	theft prevention cable.
22.	12V DC output terminal
	Used to trigger external devices
	such as an electric screen or light

control, etc. Consult your dealer for

23how to connect these devices.

23.Rear adjuster foot

24.Quick-release foot

Warning

•THIS APPARATUS MUST BE EARTHED.

•When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug.

6