ViewSonic PJD7382 Selecting a picture mode on page 32 for details, mode on page 33 for details

2. PICTURE menu

3. SOURCE menu

Function	Description
Color Mode	Pre-defined picture modes are provided so you can optimize
	your projector image set-up to suit your program type. See
	"Selecting a picture mode" on page 32 for details.
Reference	Selects a picture mode that most suits your need for the image
	quality and further fine-tune the image based on the selections
Mode	listed on the same page below. See "Setting the User 1/User 2
	mode" on page 33 for details.
Brightness	Adjusts the brightness of the image. See "Adjusting Brightness"
	on page 33 for details.
Contrast	Adjusts the degree of difference between dark and light in the
	image. See "Adjusting Contrast" on page 33 for details.
Color	Adjusts the color saturation level -- the amount of each color in a
	video image. See "Adjusting Color" on page 34 for details.
	Adjusts the red and green color tones of the image. See
Tint	"Adjusting Tint" on page 34 for details.
	The function is only available when Video or S-Video with
	NTSC system is selected.
Sharpness	Adjusts the image to make it look sharper or softer. See
	"Adjusting Sharpness" on page 34 for details.
Brilliant	Adjusts white peaking while maintaining correct color
Color	presentation. See "Adjusting Brilliant Color" on page 34 for
	details.
Color	See "Selecting a Color Temperature" on page 34 for details.
Temperature
Save	Saves the settings made for the User 1 or User 2 mode.
Settings

Quick Auto	See "Switching input signal" on page 27 for details.
Search

49