The alarm will sound for 100 seconds once activated. By pressing the snooze button the alarm will be suspended for 8 minutes.
Operation of the snooze function can be done in two ways:
•Press and release the “SNOOZE” button on the front of the travel alarm.
•With the travel alarm resting open on a flat surface, by gently pushing back on the top of the alarm.
NOTE: This movement causes the opened lid to activate a second snooze button which is located on the bottom of the travel alarm (it can be seen just below the battery compartment).
TROUBLESHOOTING
NOTE: For problems not solved, please contact La Crosse Technology via
Problem: The time and date will not set initially.
Solution: It usually takes overnight before the clock can receive the signal due to the interference the sun has on the WWVB signal. Wait overnight for the signal.
Solution: Computer monitors and televisions can cause interference with the signal reception. Please keep the clock at least six feet from electrical sources.
Solution: In some areas of the US, in particular on the East and West coasts, the signal is very weak. It may take up to 72 hours before a good signal is received. The reception can be helped by placing the clock in a window facing Colorado, with the back towards Colorado.
MAINTENANCE AND CARE INSTRUCTIONS
•Extreme temperatures, vibration, and shock should be avoided to prevent damage to the unit.
•Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings.
•Do not submerge in water.
•Do not subject the units to unnecessary heat or cold by placing them in the oven or freezer.
•Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology repairs.
SPECIFICATIONS
Dimensions: | 2.5” x 1” x 3.75” |
(L x W x H) | (63x 25 x 95 mm) |
Battery | One AA Alkaline Battery |
|
|
Battery life | Approximately 1 year |
|
|
5
