Table 6.1 | MIO and EIO Ethernet Configuration Pages | ||
|
| (Internal Print Servers) (2 of 2) | |
|
|
|
|
Item |
| Description | Troubleshooting Information |
|
|
|
|
5 |
| Apple | This lists information including whether |
|
| EtherTalk/LocalTalk | or not the AppleTalk protocol is working |
|
| status information | correctly, or whether or not the protocol |
|
| (Table 7.2) | is even enabled. The NET and NODE |
|
|
| information can be used to verify that |
|
|
| the printer is communicating correctly |
|
|
| on the network. Name and zone verify |
|
|
| you selected the correct printer, and P2 |
|
|
| (shown directly below READY) |
|
|
| indicates that you are using the Phase |
|
|
| 2 EtherTalk protocol. This should be the |
|
|
| same on the printer and on your Mac OS |
|
|
| computer. |
|
|
|
|
6 |
| TCP/IP status | This lists information that should be |
|
| information (Table 7.3) | checked for accuracy when |
|
|
| troubleshooting, such as TCP/IP status, |
|
|
| IP Address, Subnet Mask, and Default |
|
|
| Gateway. From the information in this |
|
|
| section you can verify whether or not |
|
|
| this is the only device using this IP |
|
|
| address and whether or not the address |
|
|
| is valid based on the subnet mask that |
|
|
| is being used. If a router is used, you |
|
|
| can verify that the Default Gateway is |
|
|
| the IP address of the router on the |
|
|
| printer side of the router. |
|
|
| Note: Only the first 18 characters of the |
|
|
| hostname are printed on the |
|
|
| configuration page. |
|
|
|
|
7 |
| DLC/LLC status | Lists the server address after it has |
|
| information (Table 7.4) | been configured. |
|
|
|
|
EN | Troubleshooting the HP JetDirect Print Server 97 |
