Configuring Print Queues Using SAM (HP-UX systems)
On
Before you execute the SAM program, select an IP address for the HP JetDirect print server and set up an entry for it in the /etc/hosts file on your system running
1.Start the SAM utility as a superuser.
2.Select Peripheral Devices from the Main menu.
3.Select Printers/Plotters from the Peripheral Devices menu.
4.Select Printers/Plotters from the Printers/Plotters menu.
5.Select Add a Remote Printer from the Actions list, then select a printer name.
Examples: my_printer or printer1
6.Select a remote system name.
Example: jetdirect1 (node name of the HP JetDirect print server)
7.Select a remote printer name.
Type text for ASCII or raw for PostScript, PCL, or
8.Check for a remote printer on a BSD system. You must type Y.
9.Click OK at the bottom of the menu. If the configuration is successful, the program prints the message:
The printer has been added and is ready to accept print requests.
64 Configuring for LPD Printing
EN
