HP 300X manual Tftp Configuration File Entries, Tags in the bootptab file 2, T144

Table 3.1	Tags in the “bootptab” file (2 of 2)
gw		The gateway IP address tag. This address identifies the
		IP address of the default gateway (router) that the HP
		JetDirect print server will use for communications with
		other subnets.
sm		The subnet mask tag. The subnet mask will be used by
		the HP JetDirect print server to identify the portions of an
		IP address that specify the network/subnetwork number
		and the host address.
lg		The syslog server’s IP address tag. It specifies the server
		that the HP JetDirect print server sends syslog messages
		to.
T144		A vendor-specific tag that specifies the relative path name
		of the TFTP configuration file. Maximum length of the path
		name is 33 characters. The path name must be in double
		quotes (for example, “pathname” ). On HP-UX systems,
		/usr/tftpdir is prepended to the path. For file format
		information, refer to “TFTP Configuration File Entries“.

A colon (:) indicates the end of a field, and a backslash (\) indicates that the entry is continued on the next line. Spaces are not allowed between the characters on a line. Names, such as host names, must begin with a letter and can contain only letters, numbers, periods, or hyphens.The underline character (_) is not allowed. Refer to your system documentation or online help for more information.

TFTP Configuration File Entries

To provide additional configuration parameters for your HP JetDirect print server, such as SNMP (Simple Network Management Protocol) or non-default settings, an additional configuration file can be downloaded using TFTP. This TFTP configuration file’s relative path name is specified in the BOOTP reply using the /etc/bootptab file’s T144 vendor-specific tag entry. An example of a TFTP configuration file is provided below (the symbol ‘#’ denotes a remark and is not included in the file).

EN TCP/IP Configuration 29