
Table 7.3 | TCP/IP Configuration Messages (2 of 2) | |
|
|
|
Message |
| Description |
|
| |
SNMP GET CMTY | Indicates whether or not an IP SNMP get community name | |
NAME: |
| has been configured for the print server. This parameter is |
ALL or SPECIFIED | omitted when the print server is configured from the | |
|
| printer's control panel. ALL indicates that the print server |
|
| will accept all SNMP community names for GetRequests. |
|
| SPECIFIED indicates that a specific SNMP get community |
|
| name is configured. |
|
| |
SNMP SET CMTY | Indicates whether or not an IP SNMP set community name | |
NAME: |
| has been configured for the print server. This parameter is |
NONE or SPECIFIED | omitted when the print server is configured from the | |
|
| printer's control panel. NONE indicates that the print server |
|
| will not accept any SNMP community names for |
|
| SetRequests. SPECIFIED indicates that a specific SNMP |
|
| set community name is configured. |
|
| |
BOOTP SERVER | The IP address of the system that responds to the print | |
|
| server's BOOTP request with configuration data. This |
|
| parameter is omitted when the print server is not |
|
| configured using BOOTP. NOT SPECIFIED indicates that |
|
| the server's IP address field in the BOOTP reply packet |
|
| was zero. |
|
| |
DHCP SERVER | The IP address of the system that responds to the print | |
|
| server's DHCP request with configuration data. This |
|
| parameter is omitted when the print server is not |
|
| configured using DHCP. |
|
| |
CONFIG FILE: | The name of the HP JetDirect configuration file. The file | |
|
| pathname may be truncated to fit on two lines. This |
|
| parameter is omitted when the print server is configured |
|
| from the printer's control panel. NOT SPECIFIED indicates |
|
| that a file was not specified in the BOOTP reply from the |
|
| host. |
|
|
|
114 HP JetDirect Configuration Page Messages
EN