HP 300X manual User Commands for HP JetDirect FTP Server Description, PORT3

Table 5.1 User Commands for HP JetDirect FTP Server

Command	Description
user <username>	<username> specifies a user. Any user will be
	accepted and can print to the selected port.
cd <port#>	<port#> selects a port number for printing. For
	HP JetDirect single-port print servers, only port1 is
	available. For multiport print servers, specify port1
	(default), port2, or port3.
cd/	/ specifies the root directory of the HP JetDirect FTP
	server.
quit	quit or bye terminates the FTP session with the
	HP JetDirect print server.
bye
dir	dir or ls displays the contents of the current
	directory. If this command is typed in the root
ls
	directory, a list of available ports for printing is
	displayed. For multiport print servers, the available
	ports for printing are PORT1 (default), PORT2, and
	PORT3.
pwd	Displays the current directory or the current JetDirect
	printing port.
put <filename>	<filename> specifies the file to send to the
	selected HP JetDirect print server port. For multiport
	print servers, a different port can be specified in the
	command: put <filename> <port#>
bin	Configures an FTP binary (image) file transfer.
ascii	Configures an FTP ASCII file transfer. HP JetDirect
	print servers support only non-print format control for
	character transfers (standard values for spacing and
	margins are used).
[Ctrl-C]	Press the [Ctrl] and [C] keyboard keys
	simultaneously to abort the FTP service command
	and any transfer of data. The data connection is
	closed.
rhelp	Displays the FTP commands supported.

EN FTP Printing 79