Table 3.2 TFTP Configuration File Parameters (2 of 3)

contact:

ASCII character string that identifies the person who

 

administers or services the printer (SNMP sysContact

 

object). This may include how to contact this person. The

 

default contact is undefined.

 

 

get-community-

Specifies a password that determines which SNMP

name:

GetRequests the HP JetDirect print server will respond

 

to. This is optional. The community name must be ASCII

 

characters. The maximum length is 32 characters.

 

 

set-community-

Specifies a password that determines which SNMP

name:

SetRequests (control functions) the HP JetDirect print

 

server will respond to. The community name of an

 

incoming SNMP SetRequest must match the print

 

server’s “set community name” for the print server to

 

respond. SetRequests must come from hosts that are

 

configured in the print server’s host access list.

 

Community names must be ASCII characters. The

 

maximum length is 32 characters.

 

 

trap-dest:

Enters a host’s IP address into the HP JetDirect print

 

server’s SNMP trap destination list. If the list is empty,

 

the print server does not send SNMP traps. The list may

 

contain up to four entries. The default SNMP Trap

 

Destination List is empty. To receive SNMP traps, the

 

systems listed on the SNMP trap destination list must

 

have a trap daemon to listen to those traps.

 

 

trap-community

Community name (password) included with SNMP traps

-name:

that are sent by the HP JetDirect print server to a host

 

computer. The default community name is public.

 

Community names must be ASCII characters. The

 

maximum length is 32 characters.

 

 

authentication-

Configures the print server to send (on) or not send (off)

trap:

SNMP authentication traps. Authentication traps indicate

 

that an SNMP request was received, but the community

 

name check failed. The default is “off.” Newer

 

HP JetDirect EIO cards will not support the separate

 

SNMP authentification trap setting. (All SNMP traps will

 

be set in the SNMP Trap Destination List.)

 

 

32 TCP/IP Configuration

EN

Page 38
Image 38
HP 300X manual Tftp Configuration File Parameters 2