Table 7.5 | General HP JetDirect Messages (13 of 15) | |
|
|
|
Message |
| Description |
|
| |
TRYING TO CONNECT | The HP JetDirect print server is trying to connect to the print | |
TO SERVER |
| server or NetWare file server after being configured. Wait |
|
| for the print server to establish a connection with the print |
|
| or file server. |
|
| |
TURN PRINTER | This message may appear after you upgrade to a new | |
OFF/ON |
| version of firmware. When this message appears, turn the |
|
| printer off, then back on to enable any new functionality that |
|
| was recently downloaded. |
|
| |
UNABLE TO ATTACH | A failure was detected when the HP JetDirect print server | |
TO QUEUE |
| tried to attach to one of the queues assigned to the print |
|
| server object. This may be because no servers are allowed |
|
| to attach to this queue. There may also be a networking or |
|
| security problem. Use PCONSOLE to make sure that |
|
| servers are allowed to attach to the queue, to delete the print |
|
| server object from the list of queue servers if you want the |
|
| HP JetDirect print server to service other queues, or to |
|
| delete the queue and create a new one (the print server |
|
| object must be added to the list of queue servers). |
|
| When the HP JetDirect print server is configured for multiple |
|
| file servers, the error is only displayed on the configuration |
|
| page if none of the file servers made the connection. |
|
|
|
UNABLE TO |
| Remote Printer mode: The HP JetDirect print server was |
CONNECT TO | unable to establish an SPX connection with the print server. | |
SERVER |
| Make sure that the print server is running and that all cables |
|
| and routers are functioning correctly. |
|
| Queue Server mode: The HP JetDirect print server could |
|
| not establish an NCP connection to the file server. Make |
|
| sure that the correct file servers are connected. |
|
| When multiple file servers are configured, the error is only |
|
| displayed on the configuration page if none of the file servers |
|
| were successfully connected. |
|
| |
UNABLE TO FIND | The HP JetDirect print server was unable to find the | |
SERVER |
| NetWare print server (Remote Printer mode) or file server |
|
| (Queue Server mode). (There was no response to service |
|
| queries for advertising print servers or file servers that |
|
| matched the configured print server or file server name.) |
|
| Make sure that the print server or file server is running and |
|
| that the print server or file server name configured on the |
|
| HP JetDirect print server matches the actual name used by |
|
| the print server or file server. Also make sure that all cables |
|
| and routers are functioning correctly. |
|
|
|
EN | HP JetDirect Configuration Page Messages 127 |
