Moving to Another Network
When moving an HP JetDirect print server that is configured with an IP address to a new network, make sure that the IP address does not conflict with addresses on the new network. You may change the IP address of the print server to one that can be used on the new network, or erase the current IP address and configure another address after you are installed on the new network. Cold reset the print server (see Chapter 6, “Troubleshooting the HP JetDirect Print Server,” for instructions).
If the current BOOTP server is not reachable, you may need to locate a different BOOTP server and configure the printer to this server.
If the print server was configured using BOOTP, DHCP or RARP, edit the appropriate system files with updated settings. If the IP address was manually set (for example, from the printer control panel or Telnet), reconfigure IP parameters as described in this chapter.
EN | TCP/IP Configuration 55 |
