![](/images/new-backgrounds/1284716/284716217x1.webp)
Understanding the Ethernet and
Token Ring Configuration Pages
(External Print Servers)
This section describes the Ethernet/802.3 and Token Ring/802.5 configuration page for HP JetDirect external print servers.
The networking section of each configuration page is divided into sections. The item numbers in the following table correspond to the callouts in Figures 6.6 through Figure 6.8. The table references correspond to tables in Chapter 7.
Table 6.3 Ethernet and Token Ring Configuration Pages (External Print Servers) (1 of 2)
Item | Description | Troubleshooting Information |
|
|
|
1 | Environment information | Firmware revision number, type of |
| (Table 7.5) | network (Ethernet or Token Ring), LAN |
|
| hardware address, port selection type, |
|
| active ports |
|
| speed, and manufacturing identification |
|
| number. |
|
|
|
2 | HP JetDirect print server | Lists error conditions or Ready. |
| status information |
|
| (Table 7.5) |
|
|
|
|
3 | Network statistics | Packets received, framing errors, |
| (Table 7.5) | transmit collisions, and other network |
|
| statistics. |
|
|
|
4 | Novell NetWare status | Novell NetWare frame types received. |
| information (Table 7.1) | May indicate if the print server is locking |
|
| onto the wrong frame type, that multiple |
|
| frames are using the same network |
|
| number, and more. |
|
|
|
EN | Troubleshooting the HP JetDirect Print Server 103 |