HP 300X manual General HP JetDirect Messages 12

Table 7.5	General HP JetDirect Messages (12 of 15)
Message		Description
SIGNAL LOSS		The HP JetDirect print server has detected a loss of signal
		on the ring. Check the cable from the HP JetDirect print
		server to the network and check the wiring concentrator.
		or
		A signal loss condition has been detected at the
		HP JetDirect print server receiver input during the open
		process (either when wrapped or inserted onto the ring).
SINGLE STATION		The HP JetDirect print server has sensed that it is the only
		station on the ring.
SQE ERROR		Run the power-on self-test: turn the printer off, then on
		again. If the error persists, replace the HP JetDirect print
		server.
TFTP IN PROGRESS		The HP JetDirect print server is currently in the process of
		obtaining its basic IP configuration information through
		TFTP and has not detected any errors.
TFTP LOCAL ERROR		The TFTP transfer of the configuration file from the host to
		the HP JetDirect print server failed with the local print server
		encountering some form of inactivity timeout, or excessive
		retransmissions situation.
TFTP REMOTE		The TFTP transfer of the configuration file from the host to
ERROR		the HP JetDirect print server failed with the remote host
		sending a TFTP ERROR packet to the print server.
TFTP RETRIES		The overall retrying of the TFTP transfer of the configuration
EXCEEDED		file from the host to the HP JetDirect print server has
		exceeded a retry limit.
TIMEOUT		The HP JetDirect print server fails to logically insert onto the
		ring before the insertion timer expires. Each phase of the
		insertion process must complete before expiration of the
		18-second insertion timer.
TOKEN ERRORS:		Total number of times a violation of the token-passing
		protocol has been detected.
TOTAL PACKETS		Total number of frames (packets) received by the
RECEIVED:		HP JetDirect print server without error. This includes
TOTAL PACKETS		broadcast, multicast packets, and packets specifically
RCVD:		addressed to the print server. This number does not include
		packets specifically addressed to other nodes.
TRANSMIT BEACON		The HP JetDirect print server is transmitting beacon frames
		to the ring.
TRANSMIT ERROR		Check the network topology and verify all cable segments.

126 HP JetDirect Configuration Page Messages

EN