HP 300X manual Installing the DLC Transport and Driver Software, Run Windows NT

Installing the DLC Transport and Driver Software

All software necessary to support the HP JetDirect print server is included with the Windows NT operating system. Follow the steps below to install the DLC Transport and Driver software for the HP JetDirect print server.

Note	The HP Network Port software is installed
	automatically with the DLC protocol.

Windows NT 4.0

1.Log onto the network with Supervisor privileges at any user workstation.

2.Run Windows NT.

3.Right-click on Network Neighborhood and then click Properties. The Network window appears.

4.Click the Protocols tab and then click Add. The Select Network Protocol box appears.

5.Select DLC Protocol and then click OK.

6.Follow the directions on the screen to complete the installation.

7.To verify that the DLC software is installed, right-click on Network Neighborhood, click Properties, and then click the Protocols tab. Make sure that DLC Protocol appears in the Network Protocols window.

144 Printing on Windows NT DLC/LLC Networks

EN