Table 7.1 | Novell NetWare Configuration Messages (1 of 2) | |
|
|
|
Message |
| Description |
|
| |
IPX/SPX STATUS: | Indicates the current IPX/SPX protocol status. | |
|
| DISABLED indicates that IPX/SPX was manually disabled. |
|
| READY indicates the HP JetDirect print server is awaiting |
|
| data. |
|
| INITIALIZING indicates that the print server is registering |
|
| the node address or name. |
|
| Code is in the middle of a download. |
|
|
|
MODE: |
| The mode used by the print server. |
|
| QUEUE SERVER indicates that the print server receives |
|
| data directly from the queue; REMOTE PRINTER, with the |
|
| printer number following it, indicates that the print server |
|
| emulates a Novell remote printer. If the printer is not |
|
| configured, this field displays QUEUE SERVER. |
|
| |
SOURCE ROUTING: | Indicates the current status of source routing. | |
|
| UNKNOWN is displayed when NetWare source routing is |
|
| configured to AUTO, but the source routing method has not |
|
| been detected. |
|
| NO is displayed when source routing is configured to AUTO, |
|
| and the automatic algorithm has determined that source |
|
| routing should not be used. |
|
| YES is displayed when source routing is configured to |
|
| AUTO, and the automatic algorithm has determined that |
|
| source routing should be used. |
|
| DISABLED, SINGLE R, or ALL RT is displayed when the |
|
| user has manually configured source routing through the |
|
| printer's control panel or through software. |
|
| |
NODE NAME: | Queue Server Mode: The print server name. This name | |
|
| must match a valid print server on the appropriate NetWare |
|
| file server. The default name is NPIXXXXXX. |
|
| Remote Printer Mode: The name you gave the network |
|
| printer when you configured the network printer. The default |
|
| name is NPIXXXXXX. |
|
|
|
110 HP JetDirect Configuration Page Messages
EN
