Table 7.2 | Apple EtherTalk/LocalTalk Configuration Messages | |
|
|
|
Message |
| Description |
|
| |
APPLETALK STATUS: | Current AppleTalk status. | |
|
| DISABLED indicates that EtherTalk was manually |
|
| disabled. LocalTalk is always enabled. |
|
| READY indicates that the HP JetDirect print server is |
|
| awaiting data. |
|
| INITIALIZING indicates that the print server is registering |
|
| the node address or name. |
|
| |
LTALK NET: XXXXX | NET: identifies the AppleTalk Network Number on which | |
NODE:XXX |
| the HP JetDirect print server is currently operating. NODE: |
|
| identifies the AppleTalk Node Number that the print server |
ETALK NET: XXXXX | chose for itself as part of its initialization sequence. PX | |
NODE:XXX: X | identifies the configured EtherTalk network protocol phase. | |
|
| P1 is the earlier or original version of the EtherTalk |
|
| protocol. P2 is the current version of the EtherTalk protocol. |
|
| |
APPLETALK NAME: | The name of the printer on the AppleTalk network. A | |
|
| number after the name indicates that there are multiple |
|
| devices with this name, and this is the Nth instance of the |
|
| name. |
|
| |
APPLETALK TYPE | The type of the printer being advertised on the network. | |
|
| |
ETALK ZONE: | The name of the EtherTalk network zone on which the | |
|
| printer is located. |
|
| |
LTALK ZONE: | The name of the LocalTalk network zone which the printer | |
|
| is located. |
|
| |
PORT X STATUS: | READY: Print server is awaiting data. | |
|
| INITIALIZING: Print server is registering the node address |
|
| or name/type. |
|
|
|
112 HP JetDirect Configuration Page Messages
EN
