4.Does a 40 ERROR appear on the display?
The HP JetDirect print server detected a break in the data communications. When this error occurs, the printer goes offline.
A break in communications may result from the physical network connection being disrupted or the server going down. If your printer has “auto continue” and it is set to “OFF,” you must press the appropriate key ([Continue], for example) on the printer after the communications problem is solved to put the printer back online. Setting auto continue to ON forces the printer to reconnect without user intervention. However, this does not solve the disconnect problem.
5.Does an initializing (INIT) message appear on the display?
This is a normal message. Wait about 3 minutes for the message to clear, or another message to appear. If another message appears, see the printer manual or the configuration page for additional information.
6.Does an 80 SERVICE message appear on the display?
Turn the printer off, then on again. If the message reappears, reinstall the HP JetDirect print server. If the service message persists try the following procedure:
■Turn the printer off.
■Remove the HP JetDirect print server from the printer.
■Turn the printer on again.
88 Troubleshooting the HP JetDirect Print Server
EN
