Paradyne 6800 Configuration Change Notification ccn, Configuration Change Notification Input Form

Modem/DSU Commands

Configuration Change Notification (ccn)

Use the ccn command to display the configuration events that have occurred on a COMSPHERE device. You can also use this command to clear the memory area in the device where the configuration events are stored.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Help Desk, Data Technician, Manager, System Administrator

Abbreviation: ccn

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Configuration Change Notification Enable/Disable (ccned)

Configuration Change Notification Input Form

The Configuration Change Notification input form contains the following fields:

Device(s) (Required field)

Enter the device(s) whose configuration changes will be displayed. One or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Test state (Required field)

Enter display to display configuration events for the device(s) specified.

Enter clear to display the configuration events for the specified device(s), and then clear memory.

A pop-up menu is available listing valid selections.

6800-A2-GB31-20 January 1997 2-89