Modem/DSU Commands

Receive Signal Level (rsl)

Use the rsl command to estimate the received signal level at DATAPHONE II Analog Private Line (APL) modems or Direct Distance Dial (DDD) modems that support this command. The level is displayed in negative dBm. An acceptable received signal level falls between ±12 and ±20 dBm.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Help Desk, Data Technician, Manager, System Administrator

Abbreviation: rsl

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Receive Signal Quality (rsq)

Signal Profile (sp)

Receive Signal Level Input Form

This input form contains the following field:

Device(s) (Required field)

Enter the device(s) for which the receive signal level will be estimated. One or more devices may be entered. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Receive Signal Level Results Form

This results form displays device information for each device specified, and displays the estimated received signal level (in dBm).

6800-A2-GB31-20

January 1997

2-187

Page 210
Image 210
Paradyne 6800 manual Receive Signal Level rsl, Receive Signal Level Input Form, Receive Signal Level Results Form