COMSPHERE 6800 Series Network Management System

Set CCN event (Required field)

If configuration change notification has been enabled for this device, use this field to determine whether or not this configuration change will be reported to the NMS.

Enter yes to report this change to the NMS.

Enter no (default) to prevent this change from being reported to the NMS.

If configuration change notification has been disabled for this device, configuration changes are not reported to the NMS regardless of what is entered here.

A pop-up menu is available listing valid selections.

Page 2 for COMSPHERE Devices in DPII Mode

The following input form is displayed when a COMSPHERE device in DATAPHONE II mode is identified on the initial input form.

This input form contains the following fields:

DATAPHONE II mode local address (Required field)

Enter the new local address for the device. The valid range of values for COMSPHERE devices in DATAPHONE II mode is from 11 through 328. Refer to the user's guide for valid addressing conventions.

NOTE

When you enter a value in this field, the corresponding Advanced mode address is displayed automatically in the Advanced mode address field.

Advanced mode address (Required field)

Enter the corresponding Advanced mode network address for the device. The valid range of values for a 3400/4400 Series modem is from 1 through 256. The valid range of values for a 3600 Series DSU is from 1 through 79. Refer to the user's guide for valid addressing conventions.

NOTE

When you enter a value in this field, the corresponding

DATAPHONE II mode address is displayed automatically in the

DATAPHONE II mode local address field.

Carrier (Display field)

Displays the number of the new carrier in which the device resides.

2-36

January 1997

6800-A2-GB31-20

Page 59
Image 59
Paradyne 6800 manual for Comsphere Devices in Dpii Mode, Dataphone II mode local address Required field