Paradyne 6800 manual Display Telephone Numbers dstn, Display Telephone Numbers Input Form

COMSPHERE 6800 Series Network Management System

Display Telephone Number(s) (dstn)

Use the dstn command to display the telephone number(s) in a COMSPHERE 3400/4400 Series modem equipped with an Auto Call, Auto Answer (ACAA) unit, or the local telephone number associated with a COMSPHERE 3600 Series DBM. For more information on the fields that appear on the screen, see the Change Telephone Number(s) (chtn) command. For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Help Desk, Data Technician, Manager, System Administrator

Abbreviation: dstn

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Change Telephone Number(s) (chtn)

Display Telephone Number(s) Input Form

This input form contains the following field:

Device (Required field)

Enter the device whose telephone numbers are to be displayed. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/ System Administrator's Guide.

Display Telephone Number(s) Results Form

Figure 2-44 is a sample of the Display Telephone Number(s) results form for 3400/4400 Series modems.

2-140 January 1997 6800-A2-GB31-20