Paradyne 6800 manual Change Telephone Numbers chtn, Change Telephone Numbers Input Forms

Modem/DSU Commands

Change Telephone Number(s) (chtn)

(Disruptive)

Use the chtn command to change one or more of the telephone numbers used by a COMSPHERE 3400/4400 Series modem equipped with the Auto-Call Auto-Answer (ACAA) unit; or use this command to change the local telephone number associated with a COMSPHERE 3600 Series DBM.

There are two telephone directories in the 3600 Series DSU's DBM. The first directory is accessed with the Change Call Directory (chcd) command. This directory stores the telephone numbers of the remote DBMs that are called when the DDS link fails. The second directory is accessed with the Change Telephone Number(s) (chtn) command and contains the telephone number of the DBM itself. This is the telephone number used by the other DBMs to call it.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level:	Data Technician, Manager, System Administrator
Abbreviation:	chtn
Restrictions:	For 3600 Series DSUs with the DBM option, only the local telephone
	number can be changed.
Routine:	Yes
Schedule:	Yes
Related Commands:	Display Telephone Number(s) (dstn)

Change Telephone Number(s) Input Forms

There are two pages for the Change Telephone Number(s) input form.

Page 1

Page 1 enables you to specify the modem for which telephone numbers are to be changed.

This input form contains the following field:

Device (Required field)

Enter the device whose telephone number(s) will be changed. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

The format of the second page depends on the device type specified in the initial input form. For the device specified, you can change the local and remote receive and transmit numbers.

6800-A2-GB31-20 January 1997 2-71