Modem/DSU Commands

Display Options (dso)

Use the dso command to display the current option settings on a COMSPHERE or DATAPHONE II device.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Help Desk, Data Technician, Manager, System Administrator

Abbreviation: dso

Alternate: dsop

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Change Options (cho)

Display Options Input Form

This input form contains the following field:

Device(s) (Required field)

Enter the device(s) whose options are to be displayed. One or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Display Options Results Forms

Options will vary according to the device type selected. The results forms list device information for each specified device, and the set of options obtained from the device. See the Change Options (cho) command description for the format of options displayed.

6800-A2-GB31-20

January 1997

2-133

Page 156
Image 156
Paradyne 6800 manual Display Options dso, Display Options Input Form, Display Options Results Forms, Abbreviation dso