COMSPHERE 6800 Series Network Management System

Manage Call Statistics (mcs)

Use the mcs command to specify when the 6800 Series NMS will retrieve call statistics from local COMSPHERE 3800/3900 Series modems. This may be done up to twice a day. You can also use this command to turn off call statistics retrieval. In addition, you can specify whether or not call detail information should be stored.

NOTE

The mcs command is used globally to specify collection of call statistics and call detail information. To indicate whether or not this information will be retrieved from a specific device, call statistics fields in individual 3800 Series modem device profiles can be populated appropriately.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Manager, System Administrator

Abbreviation: mcs

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Edit Device Profile

Manage Call Statistics Input Form

This input form contains the following fields:

Store Call Statistics Data (Required field)

Specify whether or not call statistics should be retrieved.

Valid entries are yes (default) or no. If no is selected, the following message is displayed:

Entering no entry in the Store call statistics data field causes the 6800 NMS to stop gathering call statistics.

A pop-up menu is available listing valid selections.

Daily scheduled update(s)

Specify one or two daily time periods at which NMS will begin retrieving call statistics.

Valid format is hh:mm (military format only). The default is 01:00.

2-180

January 1997

6800-A2-GB31-20

Page 203
Image 203
Paradyne 6800 Manage Call Statistics mcs, Manage Call Statistics Input Form, Store Call Statistics Data Required field