Paradyne 6800 manual Modem Bit Error Rate Results Form

Modem/DSU Commands

Mode

Enter one of the following options:

start

To reset the bit error rate counter to zero and start the bit error rate test.

abort

To stop the bit error rate test.

display-BERT-counters

To display the error count while the test continues to run.

reset-BERT-counters

To display, then reset the error count while the test continues to run.

A pop-up menu is available listing valid selections.

Modem Bit Error Rate Results Form

The results form displays device information for the device specified, the requested mode (start, abort, display-BERT-counters,reset-BERT-counters), and the requested port.

•If start or abort was specified on the input form, a text messages displays indicating whether or not the test was successful.

•If display-BERT-countersor reset-BERT-counterswas specified on the input form, the results form displays, as in Figure 2-60.

6800-A2-GB31-20 January 1997 2-183