COMSPHERE 6800 Series Network Management System

Display Port Speed(s) (dspsp)

Use the dspsp command to display the port speed configuration of the ports on one or more

COMSPHERE 3400/4400 Series modems with TDM.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Data Technician, Manager, System Administrator

Abbreviation: dspsp

Alternate: dsportsp

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Change Options (cho)

Change Port Options (chpo)

Display Port Options (dspo)

Change Port Speed(s) (chpsp)

Display Port Speed(s) Input Form

This input form contains the following field:

Device(s) (Required field)

Enter the device(s) whose port speeds are to be displayed. One or more device(s) may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Display Port Speed(s) Results Form

Different results forms are displayed depending on the device to which the command is sent. Figure 2-43 is a sample of Page 1 of the Display Port Speed(s) results form for a 3400/ 4400 Series modem. The figures in this form display the port speeds associated with a 19.2 kbps modem.

2-138

January 1997

6800-A2-GB31-20

Page 161
Image 161
Paradyne 6800 manual Display Port Speeds dspsp, Display Port Speeds Input Form, Display Port Speeds Results Form