Modem/DSU Commands

This form contains the following field:

Exception test (Required field)

Enter the abbreviation of the command for which the exception report is to be generated. Valid entries are ant, cli, clo, det, dit, eet, ot, rsl, rsq, rtp, sp.

A pop-up menu is available listing valid selections.

Depending on the test specified, the input form displays (for each modem type) the failure thresholds applicable to that test. These fields default to the threshold values specified with the Change Exception Reporting Thresholds (chert) command. You may accept these default values or change them. Changing the values displayed here does not affect the values defined in the chert command. The changed values apply only to this exception report execution.

NOTE

￿e￿￿￿￿￿￿ ￿e￿￿￿￿ ￿￿￿￿￿ ￿e￿￿￿￿￿ ￿￿￿￿￿￿ i￿di￿￿￿i￿￿￿￿ ￿￿e￿ ￿￿e￿

￿￿￿di￿i￿￿￿ ￿￿￿ ￿￿ ￿￿￿e￿￿￿￿d￿￿ ￿￿e￿e￿￿￿e￿￿ ￿￿￿i￿￿￿e￿ ￿￿￿e￿￿￿￿d￿ ￿￿￿￿e￿￿ ￿￿e

￿￿￿￿ ￿￿￿￿i￿￿￿￿e￿

Once the threshold values have been displayed/modified, the input forms for the specified test are displayed. Enter the required input parameters for the test. Refer to the command descriptions of individual commands for more information on these parameters.

6800-A2-GB31-20

January 1997

2-161

Page 184
Image 184
Paradyne 6800 manual Exception test Required field