Paradyne 6800 Calibrate Tributary Transmitter ctt, Calibrate Tributary Transmitter Input Form

Modem/DSU Commands

Calibrate Tributary Transmitter (ctt)

Use the ctt command to cause a selected COMSPHERE 3400/4400 Series high-speed, multipoint control modem to attempt to calibrate the pre-emphasis on a selected link-attached tributary modem. For more information on the Calibrate Tributary Transmitter function, see the individual device documentation.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Data Technician, Manager, System Administrator

Abbreviation: ctt

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: None

Calibrate Tributary Transmitter Input Form

The Calibrate Tributary Transmitter input form enables you to specify a control device(s) and the tributary devices to be calibrated.

This input form contains the following fields:

Control device(s) (Required field)

Enter the control device(s) corresponding to the tributaries to be calibrated. One or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Tributary device(s) (Required field)

Enter the tributary devices to be calibrated. One or more devices may be specified. Standard addressing format applies to the input. You may also enter the keyword all to specify all tributary devices on the control modem(s) poll list.

6800-A2-GB31-20 January 1997 2-9