COMSPHERE 6800 Series Network Management System

Call Fault Read (cfr)

Use the cfr command to display the statistics for the DATAPHONE II DDD modem or COMSPHERE 3800 Series modem no answer (NA) (displays as non-answering on screen) and short holding time (HT) faults. These statistics give an overall indication of individual DDD modem activity. The call fault criteria used to initiate no answer and short holding time faults are also displayed with this command. The criteria for this command is defined with the Call Fault Criteria (cfc) command. See the cfc command for more information.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Help Desk, Data Technician, Manager, System Administrator

Abbreviation: cfr

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Call Fault Criteria (cfc)

Call Fault Read Input Form

This input form contains the following field:

Device(s) (Required field)

Enter the device(s) for which the call fault information will be displayed. One or more devices may be specified. Standard addressing format applies to input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Call Fault Read Results Form

There are two pages for the Call Fault Read results forms.

2-24

January 1997

6800-A2-GB31-20

Page 47
Image 47
Paradyne 6800 manual Call Fault Read cfr, Call Fault Read Input Form, Call Fault Read Results Form