Modem/DSU Commands

Change Line Designator (chld)

Use the chld command to change the line designator message stored in a COMSPHERE 3400/4400 Series modem. The line designator message is an alphanumeric string (up to eight characters) that can be displayed on the front panel of a COMSPHERE APL modem.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Data Technician, Manager, System Administrator

Abbreviation: chld

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Display Line Designator (dsld)

Change Line Designator Input Form

The Change Line Designator input form contains the following fields:

Device(s) (Required field)

Enter the device(s) whose line designator messages are to be changed. One or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Line designator (Required field)

Enter the line designator message, which can contain up to 8 characters of ASCII text.

This message is stored in the modem and can be displayed on the front panel.

Change Line Designator Results Form

The results form lists device information for each device specified and displays the changed line designator message.

6800-A2-GB31-20

January 1997

2-55

Page 78
Image 78
Paradyne 6800 manual Change Line Designator chld, Change Line Designator Input Form, Change Line Designator Results Form