Paradyne 6800 manual Modem/DSU Commands

Modem/DSU Commands

Some of these options are dial control characters which insert pauses and other special characters within the telephone number. The following list describes these options:

* or #	Special characters in PBX dialing.
(), space, or -	Improve readability (ignored by the modem).
P, p, or ∧\	Change the current dialing method to pulse dialing service.
t, T, or %	Change the current dialing method to touch-tone dialing service.
+	Wait up to 30 seconds for secondary dial tone (AT&T protocol).
w or W	Wait up to 30 seconds for secondary dial tone (Hayes protocol).
,	2-second pause.
/	Pause character.
\v	Delimiter separating telephone number and callback directory pointer
	for use with call-back security.
;	Reserved for future use.
k	Placed at the end of a dial string. Temporarily changes half-duplex
	emulation option.
j	Placed at the end of a dial string. Temporarily changes sync/async
	option.
±	Reserved for future use.

For example, you can enter 9+12015551212t. The plus symbol (+) represents a 30-second pause to wait for a secondary dial tone. The t indicates that touch-tone dialing service is being used.

For 3800 Series devices, enter a telephone number using the following characters:

0±9	Number
*	DTMF number *
#	DTMF number #
A	DTMF number a
B	DTMF number b
C	DTMF number c
D	DTMN number d
T	Tone dialing
P	Pulse dialing
W or +	Wait for dial tone
R	Reverse dial
@	Quiet answer
!	Hook flash
,	Pause
	Disconnect immediately (for use in calling pagers)
;	Return to command mode after dialing
space or -	Separator for readability
0	Separator for readability

6800-A2-GB31-20 January 1997 2-41