Paradyne 6800 manual Change Port Options chpo, Change Port Options Input Form, Abbreviation chpo

Models: 6800

1 237
Download 237 pages 50.18 Kb
Page 86
Image 86

Modem/DSU Commands

Change Port Options (chpo)

(Disruptive)

Use the chpo command to change the options on one or more of the ports on a COMSPHERE 3400/4400 Series modem.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Data Technician, Manager, System Administrator

Abbreviation: chpo

Alternate: chportop

Restrictions: This command can be sent only to COMSPHERE devices with TDM or MSD port cards.

Routine:Yes

Schedule:Yes

Related Commands: Change Options (cho)

Change Port Speed(s) (chpsp)

Display Options (dsop)

Display Port Options (dspo)

Display Port Speed(s) (dspsp)

Change Port Options Input Form

There are two or more pages for the Change Port Options input form.

Page 1

Page 1 enables you to specify the device for which the port options are to be changed.

This input form contains the following field:

Device (Required field)

Enter the device whose port options are to be changed. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

6800-A2-GB31-20

January 1997

2-63

Page 86
Image 86
Paradyne 6800 manual Change Port Options chpo, Change Port Options Input Form, Abbreviation chpo, RoutineYes ScheduleYes