COMSPHERE 6800 Series Network Management System

Change Canned Message (chcm)

Use the chcm command to change one or more of the six stored messages in a COMSPHERE 3400/4400 Series modem. The canned messages (of up to 40 characters in length) can be sent to an upstream or downstream device or to the NMS from the front panel of a 3400/4400 Series modem.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Data Technician, Manager, System Administrator

Abbreviation:

Abbreviation: chcm

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Display Canned Message (dscm)

Send Message (snm)

Change Canned Message Input Forms

There are two pages for the Change Canned Message input form.

Page 1

This input form contains the following fields:

Device(s) (Required field)

Enter the device(s) whose canned messages are to be changed. One or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Message number (Required field)

Enter the number of the message to be changed. Valid entries are from 1 through 6.

A pop-up menu is available listing valid selections.

Page 2

This input form contains the following field:

Message

If a single device has been specified, this field displays the corresponding canned message. If multiple devices have been specified, this field is blank. You may specify/edit the text of the canned message. Valid entry is any alphanumeric string (including special characters) of up to 40 characters.

2-44

January 1997

6800-A2-GB31-20

Page 67
Image 67
Paradyne 6800 manual Change Canned Message chcm, Change Canned Message Input Forms, Message number Required field