Paradyne 6800 manual End-to-End Test Input Form, Number of blocks Required field

Modem/DSU Commands

Figure 2-50. End-to-End Test Input Form

This input form contains the following fields:

Control Device(s) (Required field)

Enter the control device(s) to participate in this test. For 3600 Series DSUs, only one device can be specified. For other device models, one or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Tributary Device(s) (Required field)

Enter the associated tributary device(s) to participate in this test. One or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Number of blocks (Required field)

Enter the number of blocks, from 1 through 32000, to be transmitted for this test. The default is 100.

Port number (Required field)

Enter the port number from which the test will be initiated.

For 3400/4400 Series modems, valid entries are from 1 through 4.

For 3600 Series devices, valid entries are from 1 through 6 or a.

For DATAPHONE II devices, the only valid entry is 1.

A pop-up menu is available listing valid selections. The default is 1.

6800-A2-GB31-20 January 1997 2-157