Paradyne 6800 manual for 3600 Series Devices, Change Telephone Numbers Results Form

Modem/DSU Commands

Page 2 for 3600 Series Devices

This input form contains the following fields:

Local telephone number

Enter the telephone number of the device to be called.

Use the following symbols to enter the appropriate pauses or codes when entering the local number:

0±9	Digits 0 through 9
* or #	Special characters in PBX dialing
(,), space, or -	Improve readability (ignored by device)
P, p, or ∧\	Change the current dialing method to pulse dialing
T, t, or %	Changes the current dialing method to touch-tone dialing (default)
+	Allows you to wait up to 30 seconds for a secondary dial tone
	(AT&T protocol)
w or W	Wait up to 30 seconds for a secondary dial tone (Hayes protocol)
comma	Allows you to wait 2 seconds
/	Pause character.
k	Placed at the end of a dial string, temporarily changes half-duplex
	emulation option
j	Placed at the end of a dial string, temporarily changes the
	sync/async option
:	Delimiter separating the telephone number and the callback
	directory pointer (for use with callback security)

Set CCN event (Required field)

If configuration change notification has been enabled for this device use this field to determine whether or not this configuration change will be reported to the NMS. Enter yes to report this change to the NMS.

Enter no to prevent this change from being reported to the NMS.

If configuration change notification has been disabled for this device, configuration changes are not reported to the NMS regardless of what is entered in this field.

A pop-up menu is available listing valid selections.

Change Telephone Number(s) Results Form

The Change Telephone Numbers results form lists device information for the device specified and redisplays the phone number(s).

6800-A2-GB31-20 January 1997 2-73