Paradyne 6800 manual Dial Command Input Form

Modem/DSU Commands

Dial Command Input Form

A sample Dial Command input form is shown in Figure 2-28.

Figure 2-28. Dial Command Input Form

This input form contains the following fields:

Device(s) (Required field)

Enter the device(s) that are to initiate a call. One or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Number to dial (Required field)

Enter the number to be dialed. There are several options and formats available.

You can specify a telephone number.

For DATAPHONE II, COMSPHERE 3400/4400 Series, and COMSPHERE 3600 Series devices, you can specify a telephone number using the following characters:

0±9	Numeric dialing digits. (2296, 2656, 3400/4400, 3600)
* or #	Represents special characters used in PBX dialing. (2296,
	3400/4400, 3600)
(,), space, or ±	Improves readability (ignored by the modem). (2296, 3400/4400,
	3600)
p, P, or ∧\	Changes the current dialing method to pulse dialing. (2296,
	3400/4400, 3600)

6800-A2-GB31-20 January 1997 2-105