Modem/DSU Commands

Figure 2-29. Digital Test Input Form

This input form contains the following fields:

Control Device(s) (Required field)

Enter the control device(s) to be tested. For 3600 Series DSUs, only one device can be specified. For other device models, one or more devices may be specified.

Tributary Device(s)

Enter the tributary device(s) to be tested. It is not necessary to specify a tributary DDD modem. If a tributary is not specified, the control DDD establishes a call to the tributary whose phone number is contained in the control's call directory #1.

Number of 100K bit blocks or duration of test (sec)

If you are testing an APL tributary modem, enter the number of bit blocks to be sent during the test. The valid range of entries is from 1 through 3200K blocks.

If you are testing a 3600 Series DSU or a DBM associated with a DSU, enter the number of seconds this test is to run. The valid range of entries is from 1 through 3200 seconds.

Duration of test (dsu)

This field is applicable only for DATAPHONE II DSUs. If you are testing a tributary DSU, enter the duration of the test. The valid range of entries is from 1 through

255seconds.

6800-A2-GB31-20

January 1997

2-111

Page 134
Image 134
Paradyne 6800 manual Tributary Devices, Number of 100K bit blocks or duration of test sec, Duration of test dsu