COMSPHERE 6800 Series Network Management System

Group 2 contains the following parameters:

Gain hits

Phase hits

Impulse noise

Dropouts

Retrains

Number of tests (Required field)

Enter the number of times the test should be repeated to obtain trending results.

Valid entries are from 2 through 50.

A pop-up menu is available listing valid selections.

Interval between tests (Required field)

Enter the desired length of time between test executions. The specified interval must be long enough to permit the first pass of the test to complete before the second begins.

Valid entries are from 5 min. to 1440 min. or from 1 hr. to 24 hrs.

Type of results (Required field)

Enter the format of the results to be returned. Valid entries are the following:

tabular

Results are displayed in numeric columns.

graphic

Results appear on a single, multicolor graph.

Subsequent pages of the input form display for the specified command. Enter the required input parameters. Refer to the descriptions of the individual commands for more information on these parameters.

Trending Reports Results Form

There are multiple pages for the Trending Reports results form. You may request display of trending results in tabular form or in graphical form. A separate set of trending results are displayed for each device tested. The Trending Reports results are accessed via the Display Queue Results results form, which is the first screen displayed for Trending Reports results.

Figure 2-65 is a sample of the second page of the Trending Reports results form that displays if you have specified tabular trending results.

2-212

January 1997

6800-A2-GB31-20

Page 235
Image 235
Paradyne 6800 manual Trending Reports Results Form