Paradyne 6800 manual Receive Signal Spectrum Results Form, Tributary device

COMSPHERE 6800 Series Network Management System

Tributary device

Entry into this field is required only if the selected mode is start. Enter the tributary device to be involved in this test. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Receive Signal Spectrum Results Form

The Receive Signal Spectrum results form displays device information for the control and tributary device specified and the requested mode (start, abort, display). If the requested mode was start or abort, the results form displays a text message indicating whether or not the command was successfully executed. If the requested mode was display, the results form lists each of the frequencies at which the test was performed, and the received signal level (in dBm) measured at each of those frequencies. Figure 2-61 is a sample of the Receive Signal Spectrum results form for the display mode.

Figure 2-61. Receive Signal Spectrum Results Form (Display)

2-190 January 1997 6800-A2-GB31-20