Paradyne 6800 manual Protocol /4400

COMSPHERE 6800 Series Network Management System

t, T, or %	Changes the current dialing method to touch-tone dialing
	(default). (2296, 3400/4400, 3600)
w or W	Indicates wait up to 30 seconds for a secondary dial tone (Hayes
	protocol). (3400/4400, 3600)
+	Indicates wait up to 30 seconds for a secondary dial tone (AT&T
	protocol). (2296, 3400/4400, 3600)
comma	Indicates wait 2 seconds. (2296, 3400/4400, 3600)
/	Reserved for future use.
k	Is added to the end of the dial string; temporarily changes the
	half-duplex emulation option (software option 30). (2296)
j	Is added to the end of the dial string; temporarily changes the
	sync/async option. (2296)
	A delimiter separating telephone number and callback directory
	pointer (for use with callback security). (3600)
;	Reserved for future use.
-	Reserved for future use.

For 3800 Series devices, you can specify a telephone number using the following characters:

0±9	DTM for numeric dialing digits
* ,#,A,B,C,D	DTMF digits
T	Tone dialing
P	Pulse dialing
W or +	Wait for dial tone
R	Reverse dial
@	Quiet answer
!	Hook flash
,	Pause
	Disconnect immediately (for use in calling pagers)
;	Return to command mode after dialing
space or -	Separator for readability
()	Separator for readability

You can specify a telephone directory.

The telephone number in the specified directory will be used. The format is dxx where xx is a directory number.

•For 3600 Series DBMs and 3800 Series modems, xx=1 through 10.

•For COMSPHERE 3400/4400 Series modems with DBMs, xx=1 through 4.

•For DATAPHONE II devices, xx=1 through 99.

You can also specify that the line be disconnected without making a call. To disconnect the line without making a call, enter q.

2-106 January 1997 6800-A2-GB31-20