COMSPHERE 6800 Series Network Management System

Offline Test (ot)

(Disruptive)

Use the ot command to test the primary and secondary data channel circuits on a DATAPHONE 2700 Series Data Service Unit (DSU). The DSU internally transmits a message to itself 100 times on the primary and secondary channels. If one or more message errors are detected in the

transmission, the DSU fails the test.

This test is similar to the Device Test (det); however, the Offline Test (ot) command tests the channel service unit (CSU) and the det command does not. If a DSU passes a Device Test (det), but fails the ot, the problem is in the CSU.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Data Technician, Manager, System Administrator

Abbreviation: ot

Secondary: offl

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Device Test (det)

Offline Test Input Form

This input form contains the following field:

Device(s) (Required field)

Enter the device(s) for which the offline test will be performed. One or more devices may be entered. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Offline Test Results Form

The Offline Test results form displays device information for each device specified, and indicates for each device tested whether the device passed or failed.

2-186

January 1997

6800-A2-GB31-20

Page 209
Image 209
Paradyne 6800 manual Offline Test ot, Offline Test Input Form, Offline Test Results Form, Abbreviation ot